cleaning the Dyson V10’s dust binNeed to clean your Dyson V10 dust bin?
As the layer becomes thicker, the vacuum starts to.lose suction and become less effective.
If they aren’t cleaned, a clogged filter can eventually cause the vacuum to stop sucking altogether.. It’s hard to give specific advice in this section, as vacuum manufacturers have different recommendations for maintaining their filters.Check your manual to find out.how often you should clean the filter(s).
and whether they can be washed..Many modern vacuum cleaners have a washable filter.
These are typically cleaned by tapping off any loose dust, then rinsing the filter under cold water.
Make sure you allow at least 24 hours for the filter to dry before you use it again.. Other vacuums have disposable filters.Removing grime with a damp and lint-free cloth is fine, but don’t run it under a tap.
It’s particularly important to avoid detergents or cleaning products, as these can damage the vacuum..Step 3: Re-Insert The Brush Bar.
Once any obstructions on the brush bar have been removed, replace the end cap onto the end of the bar.You can then slide the brush bar back into the floorhead..